Middleware

    • class
    • class FetchFromCacheMiddleware
    • Enable the site-wide cache. If these are enabled, each Django-powered page willbe cached for as long as the CACHE_MIDDLEWARE_SECONDS settingdefines. See the .

    “Common” middleware

    • class CommonMiddleware

    • Adds a few conveniences for perfectionists:

    • Forbids access to user agents in the DISALLOWED_USER_AGENTSsetting, which should be a list of compiled regular expression objects.

    • Performs URL rewriting based on the andPREPEND_WWW settings.

    If is True and the initial URL doesn’t endwith a slash, and it is not found in the URLconf, then a new URL isformed by appending a slash at the end. If this new URL is found in theURLconf, then Django redirects the request to this new URL. Otherwise,the initial URL is processed as usual.

    For example, foo.com/bar will be redirected to foo.com/bar/ ifyou don’t have a valid URL pattern for foo.com/bar but do have avalid pattern for foo.com/bar/.

    If PREPEND_WWW is True, URLs that lack a leading “www.”will be redirected to the same URL with a leading “www.”

    Both of these options are meant to normalize URLs. The philosophy is thateach URL should exist in one, and only one, place. Technically a URLfoo.com/bar is distinct from foo.com/bar/ – a search-engineindexer would treat them as separate URLs – so it’s best practice tonormalize URLs.

    • Sets the Content-Length header for non-streaming responses.

    • CommonMiddleware.response_redirect_class

    • Defaults to HttpResponsePermanentRedirect. SubclassCommonMiddleware and override the attribute to customize the redirectsissued by the middleware.

    • class BrokenLinkEmailsMiddleware

    • Sends broken link notification emails to MANAGERS (see).

    GZip middleware

    • class GZipMiddleware

    Warning

    Security researchers recently revealed that when compression techniques(including GZipMiddleware) are used on a website, the site may becomeexposed to a number of possible attacks. Before using GZipMiddleware onyour site, you should consider very carefully whether you are subject tothese attacks. If you’re in any doubt about whether you’re affected, youshould avoid using GZipMiddleware. For more details, see the the BREACHpaper (PDF) and .

    Compresses content for browsers that understand GZip compression (all modernbrowsers).

    This middleware should be placed before any other middleware that need toread or write the response body so that compression happens afterward.

    It will NOT compress content if any of the following are true:

    • The content body is less than 200 bytes long.
    • The response has already set the Content-Encoding header.
    • The request (the browser) hasn’t sent an Accept-Encoding headercontaining gzip.If the response has an ETag header, the ETag is made weak to comply withRFC 7232#section-2.1.

    You can apply GZip compression to individual views using the decorator.

    Conditional GET middleware

    • class ConditionalGetMiddleware
    • Handles conditional GET operations. If the response doesn’t have an ETagheader, the middleware adds one if needed. If the response has an ETag orLast-Modified header, and the request has If-None-Match orIf-Modified-Since, the response is replaced by anHttpResponseNotModified.
    • class LocaleMiddleware

    • Enables language selection based on data from the request. It customizescontent for each user. See the internationalization documentation.

    • LocaleMiddleware.response_redirect_class

    • Defaults to HttpResponseRedirect. SubclassLocaleMiddleware and override the attribute to customize the redirectsissued by the middleware.

    Message middleware

    Security middleware

    Warning

    If your deployment situation allows, it’s usually a good idea to have yourfront-end Web server perform the functionality provided by theSecurityMiddleware. That way, if there are requests that aren’t servedby Django (such as static media or user-uploaded files), they will havethe same protections as requests to your Django application.

    HTTP Strict Transport Security

    For sites that should only be accessed over HTTPS, you can instruct modernbrowsers to refuse to connect to your domain name via an insecure connection(for a given period of time) by setting the . This reduces your exposure to some SSL-stripping man-in-the-middle(MITM) attacks.

    SecurityMiddleware will set this header for you on all HTTPS responses ifyou set the SECURE_HSTS_SECONDS setting to a non-zero integer value.

    When enabling HSTS, it’s a good idea to first use a small value for testing,for example, for onehour. Each time a Web browser sees the HSTS header from your site, it willrefuse to communicate non-securely (using HTTP) with your domain for the givenperiod of time. Once you confirm that all assets are served securely on yoursite (i.e. HSTS didn’t break anything), it’s a good idea to increase this valueso that infrequent visitors will be protected (31536000 seconds, i.e. 1 year,is common).

    Additionally, if you set the SECURE_HSTS_INCLUDE_SUBDOMAINS settingto True, SecurityMiddleware will add the includeSubDomains directiveto the Strict-Transport-Security header. This is recommended (assuming allsubdomains are served exclusively using HTTPS), otherwise your site may stillbe vulnerable via an insecure connection to a subdomain.

    Warning

    The HSTS policy applies to your entire domain, not just the URL of theresponse that you set the header on. Therefore, you should only use it ifyour entire domain is served via HTTPS only.

    Browsers properly respecting the HSTS header will refuse to allow users tobypass warnings and connect to a site with an expired, self-signed, orotherwise invalid SSL certificate. If you use HSTS, make sure yourcertificates are in good shape and stay that way!

    Note

    If you are deployed behind a load-balancer or reverse-proxy server, and theStrict-Transport-Security header is not being added to your responses,it may be because Django doesn’t realize that it’s on a secure connection;you may need to set the setting.

    Referrer Policy

    New in Django 3.0:

    Browsers use as a way to send information to a siteabout how users got there. When a user clicks a link, the browser will send thefull URL of the linking page as the referrer. While this can be useful for somepurposes – like figuring out who’s linking to your site – it also can causeprivacy concerns by informing one site that a user was visiting another site.

    Some browsers have the ability to accept hints about whether they should sendthe HTTP Referer header when a user clicks a link; this hint is providedvia the Referrer-Policy header. This header can suggest any of threebehaviors to browsers:

    • Full URL: send the entire URL in the Referer header. For example, if theuser is visiting , the Referer headerwould contain "https://example.com/page.html".
    • Origin only: send only the “origin” in the referrer. The origin consists ofthe scheme, host and (optionally) port number. For example, if the user isvisiting , the origin would behttps://example.com/.

    • No referrer: do not send a Referer header at all.There are two types of conditions this header can tell a browser to watch outfor:

    • Same-origin versus cross-origin: a link from to https://example.com/2.html is same-origin. A link from to https://not.example.com/page.html iscross-origin.

    • Protocol downgrade: a downgrade occurs if the page containing the link isserved via HTTPS, but the page being linked to is not served via HTTPS.

    Warning

    When your site is served via HTTPS, requires the Referer header to be present, so completelydisabling the Referer header will interfere with CSRF protection. Togain most of the benefits of disabling Referer headers while alsokeeping CSRF protection, consider enabling only same-origin referrers.

    SecurityMiddleware can set the Referrer-Policy header for you, based onthe the SECURE_REFERRER_POLICY setting (note spelling: browsers senda Referer header when a user clicks a link, but the header instructing abrowser whether to do so is spelled Referrer-Policy). The valid values forthis setting are:

    • no-referrer
    • Instructs the browser to send no referrer for links clicked on this site.
    • no-referrer-when-downgrade
    • Instructs the browser to send a full URL as the referrer, but only when noprotocol downgrade occurs.
    • origin
    • Instructs the browser to send only the origin, not the full URL, as thereferrer.
    • origin-when-cross-origin
    • same-origin
    • Instructs the browser to send a full URL, but only for same-origin links. Noreferrer will be sent for cross-origin links.
    • strict-origin
    • Instructs the browser to send only the origin, not the full URL, and to sendno referrer when a protocol downgrade occurs.
    • strict-origin-when-cross-origin
    • Instructs the browser to send the full URL when the link is same-origin andno protocol downgrade occurs; send only the origin when the link iscross-origin and no protocol downgrade occurs; and no referrer when aprotocol downgrade occurs.
    • unsafe-url
    • Instructs the browser to always send the full URL as the referrer.

    Unknown Policy Values

    Where a policy value is by a user agent, it is possible tospecify multiple policy values to provide a fallback. The last specifiedvalue that is understood takes precedence. To support this, an iterable orcomma-separated string can be used with SECURE_REFERRER_POLICY.

    X-Content-Type-Options: nosniff

    Some browsers will try to guess the content types of the assets that theyfetch, overriding the Content-Type header. While this can help displaysites with improperly configured servers, it can also pose a securityrisk.

    If your site serves user-uploaded files, a malicious user could upload aspecially-crafted file that would be interpreted as HTML or JavaScript bythe browser when you expected it to be something harmless.

    To prevent the browser from guessing the content type and force it toalways use the type provided in the Content-Type header, you can passthe X-Content-Type-Options: nosniff header. SecurityMiddleware willdo this for all responses if the settingis True.

    Note that in most deployment situations where Django isn’t involved in servinguser-uploaded files, this setting won’t help you. For example, if yourMEDIA_URL is served directly by your front-end Web server (nginx,Apache, etc.) then you’d want to set this header there. On the other hand, ifyou are using Django to do something like require authorization in order todownload files and you cannot set the header using your Web server, thissetting will be useful.

    X-XSS-Protection: 1; mode=block

    Some browsers have the ability to block content that appears to be an XSSattack. They work by looking for JavaScript content in the GET or POSTparameters of a page. If the JavaScript is replayed in the server’s response,the page is blocked from rendering and an error page is shown instead.

    The is used to control the operation of theXSS filter.

    To enable the XSS filter in the browser, and force it to always blocksuspected XSS attacks, you can pass the X-XSS-Protection: 1; mode=blockheader. SecurityMiddleware will do this for all responses if theSECURE_BROWSER_XSS_FILTER setting is True.

    Warning

    The browser XSS filter is a useful defense measure, but must not berelied upon exclusively. It cannot detect all XSS attacks and not allbrowsers support the header. Ensure you are still all input to prevent XSS attacks.

    SSL Redirect

    If your site offers both HTTP and HTTPS connections, most users will end upwith an unsecured connection by default. For best security, you should redirectall HTTP connections to HTTPS.

    If you set the setting to True, will permanently (HTTP 301) redirect all HTTPconnections to HTTPS.

    Note

    If the SECURE_SSL_HOST setting has a value, all redirects will besent to that host instead of the originally-requested host.

    If there are a few pages on your site that should be available over HTTP, andnot redirected to HTTPS, you can list regular expressions to match those URLsin the setting.

    Note

    If you are deployed behind a load-balancer or reverse-proxy server andDjango can’t seem to tell when a request actually is already secure, youmay need to set the SECURE_PROXY_SSL_HEADER setting.

    Session middleware

    • class SessionMiddleware
    • Enables session support. See the .
    • class CurrentSiteMiddleware[source]
    • Adds the site attribute representing the current site to every incomingHttpRequest object. See the sites documentation.

    Authentication middleware

    • class AuthenticationMiddleware

    • Adds the user attribute, representing the currently-logged-in user, toevery incoming HttpRequest object. See .

    • class RemoteUserMiddleware

    • Middleware for utilizing Web server provided authentication. See for usage details.

    • class PersistentRemoteUserMiddleware

    • Middleware for utilizing Web server provided authentication when enabled onlyon the login page. See for usagedetails.

    CSRF protection middleware

    X-Frame-Options middleware

    Middleware ordering

    Here are some hints about the ordering of various Django middleware classes:

    It should go near the top of the list if you’re going to turn on the SSLredirect as that avoids running through a bunch of other unnecessarymiddleware.

    Before those that modify the Vary header (SessionMiddleware,GZipMiddleware, LocaleMiddleware).

    Before any middleware that may change or use the response body.

    After UpdateCacheMiddleware: Modifies Vary header.

    Before any middleware that may raise an an exception to trigger an errorview (such as PermissionDenied) if you’reusing .

    After UpdateCacheMiddleware: Modifies Vary header.

    Before any middleware that may change the response (it sets the ETagheader).

    After GZipMiddleware so it won’t calculate an ETag header on gzippedcontents.

    One of the topmost, after SessionMiddleware (uses session data) andUpdateCacheMiddleware (modifies Vary header).

    Before any middleware that may change the response (it sets theContent-Length header). A middleware that appears beforeCommonMiddleware and changes the response must reset Content-Length.

    Close to the top: it redirects when orPREPEND_WWW are set to True.

    After SessionMiddleware if you’re using .

    Before any view middleware that assumes that CSRF attacks have been dealtwith.

    After SessionMiddleware if you’re using .

    After SessionMiddleware: uses session storage.

    After SessionMiddleware: can use session-based storage.

    After any middleware that modifies the Vary header: that header is usedto pick a value for the cache hash-key.

    Should be near the bottom as it’s a last-resort type of middleware.