[-0, +0, m]

Adds the character to the buffer B (see ).

luaL_addlstring

[-0, +0, m]

void luaL_addlstring (luaL_Buffer *B, const char *s, size_t l);

Adds the string pointed to by s with length l to the buffer B (see ). The string may contain embedded zeros.

luaL_addsize

[-0, +0, m]

void luaL_addsize (luaL_Buffer *B, size_t n);

Adds to the buffer B (see ) a string of length n previously copied to the buffer area (see luaL_prepbuffer).

luaL_addstring

[-0, +0, m]

void luaL_addstring (luaL_Buffer *B, const char *s);

Adds the zero-terminated string pointed to by s to the buffer B (see luaL_Buffer). The string may not contain embedded zeros.

luaL_addvalue

[-1, +0, m]

void luaL_addvalue (luaL_Buffer *B);

Adds the value at the top of the stack to the buffer B (see luaL_Buffer). Pops the value.

This is the only function on string buffers that can (and must) be called with an extra element on the stack, which is the value to be added to the buffer.

luaL_argcheck

[-0, +0, v]

void luaL_argcheck (lua_State *L,
                    int cond,
                    int narg,
                    const char *extramsg);

Checks whether cond is true. If not, raises an error with the following message, where func is retrieved from the call stack:

     bad argument #<narg> to <func> (<extramsg>)

luaL_argerror

[-0, +0, v]

int luaL_argerror (lua_State *L, int narg, const char *extramsg);

Raises an error with the following message, where func is retrieved from the call stack:

     bad argument #<narg> to <func> (<extramsg>)

This function never returns, but it is an idiom to use it in C functions as return luaL_argerror(*args*).

luaL_Buffer

typedef struct luaL_Buffer luaL_Buffer;

Type for a string buffer.

A string buffer allows C code to build Lua strings piecemeal. Its pattern of use is as follows:

• First you declare a variable b of type luaL_Buffer.
• Then you initialize it with a call luaL_buffinit(L, &b).
• Then you add string pieces to the buffer calling any of the luaL_add* functions.
• You finish by calling luaL_pushresult(&b). This call leaves the final string on the top of the stack.

During its normal operation, a string buffer uses a variable number of stack slots. So, while using a buffer, you cannot assume that you know where the top of the stack is. You can use the stack between successive calls to buffer operations as long as that use is balanced; that is, when you call a buffer operation, the stack is at the same level it was immediately after the previous buffer operation. (The only exception to this rule is .) After calling luaL_pushresult the stack is back to its level when the buffer was initialized, plus the final string on its top.

luaL_buffinit

[-0, +0, -]

void luaL_buffinit (lua_State *L, luaL_Buffer *B);

Initializes a buffer B. This function does not allocate any space; the buffer must be declared as a variable (see luaL_Buffer).

luaL_callmeta

[-0, +(0|1), e]

int luaL_callmeta (lua_State *L, int obj, const char *e);

Calls a metamethod.

If the object at index obj has a metatable and this metatable has a field e, this function calls this field and passes the object as its only argument. In this case this function returns 1 and pushes onto the stack the value returned by the call. If there is no metatable or no metamethod, this function returns 0 (without pushing any value on the stack).

luaL_checkany

[-0, +0, v]

void luaL_checkany (lua_State *L, int narg);

Checks whether the function has an argument of any type (including nil) at position narg.

luaL_checkint

[-0, +0, v]

int luaL_checkint (lua_State *L, int narg);

Checks whether the function argument narg is a number and returns this number cast to an int.

luaL_checkinteger

[-0, +0, v]

lua_Integer luaL_checkinteger (lua_State *L, int narg);

Checks whether the function argument narg is a number and returns this number cast to a .

luaL_checklong

[-0, +0, v]

long luaL_checklong (lua_State *L, int narg);

Checks whether the function argument narg is a number and returns this number cast to a long.

luaL_checklstring

[-0, +0, v]

const char *luaL_checklstring (lua_State *L, int narg, size_t *l);

Checks whether the function argument narg is a string and returns this string; if l is not NULL fills *l with the string’s length.

This function uses lua_tolstring to get its result, so all conversions and caveats of that function apply here.

luaL_checknumber

[-0, +0, v]

lua_Number luaL_checknumber (lua_State *L, int narg);

Checks whether the function argument narg is a number and returns this number.

[-0, +0, v]

Checks whether the function argument narg is a string and searches for this string in the array lst (which must be NULL-terminated). Returns the index in the array where the string was found. Raises an error if the argument is not a string or if the string cannot be found.

If def is not NULL, the function uses def as a default value when there is no argument narg or if this argument is nil.

luaL_checkstack

[-0, +0, v]

void luaL_checkstack (lua_State *L, int sz, const char *msg);

Grows the stack size to top + sz elements, raising an error if the stack cannot grow to that size. msg is an additional text to go into the error message.

luaL_checkstring

[-0, +0, v]

const char *luaL_checkstring (lua_State *L, int narg);

Checks whether the function argument narg is a string and returns this string.

This function uses to get its result, so all conversions and caveats of that function apply here.

luaL_checktype

[-0, +0, v]

void luaL_checktype (lua_State *L, int narg, int t);

Checks whether the function argument narg has type t. See lua_type for the encoding of types for t.

luaL_checkudata

[-0, +0, v]

void *luaL_checkudata (lua_State *L, int narg, const char *tname);

Checks whether the function argument narg is a userdata of the type tname (see luaL_newmetatable).

luaL_dofile

[-0, +?, m]

int luaL_dofile (lua_State *L, const char *filename);

Loads and runs the given file. It is defined as the following macro:

     (luaL_loadfile(L, filename) || lua_pcall(L, 0, LUA_MULTRET, 0))

It returns 0 if there are no errors or 1 in case of errors.

luaL_dostring

[-0, +?, m]

int luaL_dostring (lua_State *L, const char *str);

Loads and runs the given string. It is defined as the following macro:

     (luaL_loadstring(L, str) || lua_pcall(L, 0, LUA_MULTRET, 0))

It returns 0 if there are no errors or 1 in case of errors.

luaL_error

[-0, +0, v]

int luaL_error (lua_State *L, const char *fmt, ...);

Raises an error. The error message format is given by fmt plus any extra arguments, following the same rules of lua_pushfstring. It also adds at the beginning of the message the file name and the line number where the error occurred, if this information is available.

This function never returns, but it is an idiom to use it in C functions as return luaL_error(*args*).

luaL_getmetafield

[-0, +(0|1), m]

Pushes onto the stack the field e from the metatable of the object at index obj. If the object does not have a metatable, or if the metatable does not have this field, returns 0 and pushes nothing.

luaL_getmetatable

[-0, +1, -]

void luaL_getmetatable (lua_State *L, const char *tname);

Pushes onto the stack the metatable associated with name tname in the registry (see ).

luaL_gsub

[-0, +1, m]

const char *luaL_gsub (lua_State *L,
                       const char *s,
                       const char *p,
                       const char *r);

Creates a copy of string s by replacing any occurrence of the string p with the string r. Pushes the resulting string on the stack and returns it.

luaL_loadbuffer

[-0, +1, m]

int luaL_loadbuffer (lua_State *L,
                     const char *buff,
                     size_t sz,
                     const char *name);

Loads a buffer as a Lua chunk. This function uses lua_load to load the chunk in the buffer pointed to by buff with size sz.

This function returns the same results as . name is the chunk name, used for debug information and error messages.

luaL_loadfile

[-0, +1, m]

int luaL_loadfile (lua_State *L, const char *filename);

Loads a file as a Lua chunk. This function uses to load the chunk in the file named filename. If filename is NULL, then it loads from the standard input. The first line in the file is ignored if it starts with a #.

This function returns the same results as lua_load, but it has an extra error code LUA_ERRFILE if it cannot open/read the file.

As , this function only loads the chunk; it does not run it.

luaL_loadstring

[-0, +1, m]

int luaL_loadstring (lua_State *L, const char *s);

Loads a string as a Lua chunk. This function uses to load the chunk in the zero-terminated string s.

This function returns the same results as lua_load.

Also as , this function only loads the chunk; it does not run it.

luaL_newmetatable

[-0, +1, m]

int luaL_newmetatable (lua_State *L, const char *tname);

If the registry already has the key tname, returns 0. Otherwise, creates a new table to be used as a metatable for userdata, adds it to the registry with key tname, and returns 1.

In both cases pushes onto the stack the final value associated with tname in the registry.

luaL_newstate

[-0, +0, -]

lua_State *luaL_newstate (void);

Creates a new Lua state. It calls lua_newstate with an allocator based on the standard C realloc function and then sets a panic function (see ) that prints an error message to the standard error output in case of fatal errors.

[-0, +0, m]

Opens all standard Lua libraries into the given state.

luaL_optint

[-0, +0, v]

int luaL_optint (lua_State *L, int narg, int d);

If the function argument narg is a number, returns this number cast to an int. If this argument is absent or is nil, returns d. Otherwise, raises an error.

luaL_optinteger

[-0, +0, v]

lua_Integer luaL_optinteger (lua_State *L,
                             int narg,
                             lua_Integer d);

If the function argument narg is a number, returns this number cast to a lua_Integer. If this argument is absent or is nil, returns d. Otherwise, raises an error.

luaL_optlong

[-0, +0, v]

long luaL_optlong (lua_State *L, int narg, long d);

If the function argument narg is a number, returns this number cast to a long. If this argument is absent or is nil, returns d. Otherwise, raises an error.

luaL_optlstring

[-0, +0, v]

const char *luaL_optlstring (lua_State *L,
                             int narg,
                             const char *d,
                             size_t *l);

If the function argument narg is a string, returns this string. If this argument is absent or is nil, returns d. Otherwise, raises an error.

If is not NULL, fills the position *l with the results’s length.

luaL_optnumber

[-0, +0, v]

lua_Number luaL_optnumber (lua_State *L, int narg, lua_Number d);

If the function argument narg is a number, returns this number. If this argument is absent or is nil, returns d. Otherwise, raises an error.

luaL_optstring

[-0, +0, v]

const char *luaL_optstring (lua_State *L,
                            int narg,
                            const char *d);

If the function argument narg is a string, returns this string. If this argument is absent or is nil, returns d. Otherwise, raises an error.

luaL_prepbuffer

[-0, +0, -]

char *luaL_prepbuffer (luaL_Buffer *B);

Returns an address to a space of size LUAL_BUFFERSIZE where you can copy a string to be added to buffer B (see luaL_Buffer). After copying the string into this space you must call with the size of the string to actually add it to the buffer.

luaL_pushresult

[-?, +1, m]

void luaL_pushresult (luaL_Buffer *B);

Finishes the use of buffer B leaving the final string on the top of the stack.

luaL_ref

[-1, +0, m]

int luaL_ref (lua_State *L, int t);

Creates and returns a reference, in the table at index t, for the object at the top of the stack (and pops the object).

A reference is a unique integer key. As long as you do not manually add integer keys into table t, luaL_ref ensures the uniqueness of the key it returns. You can retrieve an object referred by reference r by calling lua_rawgeti(L, t, r). Function frees a reference and its associated object.

If the object at the top of the stack is nil, luaL_ref returns the constant LUA_REFNIL. The constant LUA_NOREF is guaranteed to be different from any reference returned by .

luaL_Reg

typedef struct luaL_Reg {
  const char *name;
  lua_CFunction func;
} luaL_Reg;

Type for arrays of functions to be registered by . name is the function name and func is a pointer to the function. Any array of luaL_Reg must end with an sentinel entry in which both name and func are NULL.

luaL_register

[-(0|1), +1, m]

void luaL_register (lua_State *L,
                    const char *libname,
                    const luaL_Reg *l);

Opens a library.

When called with libname equal to NULL, it simply registers all functions in the list l (see luaL_Reg) into the table on the top of the stack.

When called with a non-null libname, luaL_register creates a new table t, sets it as the value of the global variable libname, sets it as the value of package.loaded[libname], and registers on it all functions in the list l. If there is a table in package.loaded[libname] or in variable libname, reuses this table instead of creating a new one.

In any case the function leaves the table on the top of the stack.

luaL_typename

[-0, +0, -]

const char *luaL_typename (lua_State *L, int index);

Returns the name of the type of the value at the given index.

luaL_typerror

[-0, +0, v]

int luaL_typerror (lua_State *L, int narg, const char *tname);

Generates an error with a message like the following:

     location: bad argument narg to 'func' (tname expected, got rt)

where *location* is produced by , *func* is the name of the current function, and *rt* is the type name of the actual argument.

luaL_unref

[-0, +0, -]

void luaL_unref (lua_State *L, int t, int ref);

Releases reference ref from the table at index t (see ). The entry is removed from the table, so that the referred object can be collected. The reference ref is also freed to be used again.

If ref is LUA_NOREF or , luaL_unref does nothing.

luaL_where

[-0, +1, m]

Pushes onto the stack a string identifying the current position of the control at level in the call stack. Typically this string has the following format:

     chunkname:currentline:

Level 0 is the running function, level 1 is the function that called the running function, etc.