Monitoring ArangoDB Cluster network usage

Solution

As we already run as our metric-hub, we want to utilize it to also give us these figures. A very cheap way to generate these values are the counters in the IPTables firewall of our system.

For this recipe you need to install the following tools:

collectd: the aggregation Daemon
for inspecting the data
iptables - should come with your Linux distribution
for compact firewall code
we base on Monitoring with Collecd recipe for understanding the basics about collectd

Now we need to find out the current configuration of our cluster. For the time being we assume you simply issued

to get you set up. So you know you’ve got two DB-Servers - one Coordinator, one Agent:


arangod    21406     1  1 16:59 pts/14   00:00:00 bin/etcd-arango --data-dir /var/tmp/tmp-21550-1347489353/shell_server/agentarango4001 --name agentarango4001 --bind-addr 127.0.0.1:4001 --addr 127.0.0.1:4001 --peer-bind-addr 127.0.0.1:7001 --peer-addr 127.0.0.1:7001 --initial-cluster-state new --initial-cluster agentarango4001=http://127.0.0.1:7001
arangod    21408     1  4 16:56 pts/14   00:00:01 bin/arangod --database.directory cluster/data8629 --cluster.agency-endpoint tcp://localhost:4001 --cluster.my-address tcp://localhost:8629 --server.endpoint tcp://localhost:8629 --log.file cluster/8629.log
arangod    21410     1  5 16:56 pts/14   00:00:02 bin/arangod --database.directory cluster/data8630 --cluster.agency-endpoint tcp://localhost:4001 --cluster.my-address tcp://localhost:8630 --server.endpoint tcp://localhost:8630 --log.file cluster/8630.log
arangod    21416     1  5 16:56 pts/14   00:00:02 bin/arangod --database.directory cluster/data8530 --cluster.agency-endpoint tcp://localhost:4001 --cluster.my-address tcp://localhost:8530 --server.endpoint tcp://localhost:8530 --log.file cluster/8530.log

We can now check which ports they occupied:

The Agent has 7001 and 4001. Since it’s running in single server mode its cluster port (7001) should not show any traffic, port 4001 is the interesting one.
Claus - This is the Coordinator. Your Application will talk to it on port 8530
Pavel - This is the first DB-Server; Claus will talk to it on port 8629
Perry - This is the second DB-Server; Claus will talk to it on port 8630

According to the ports we found in the last section, we will configure our firewall in /etc/ferm/ferm.conf, and put the identities into the comments so we have a persistent naming scheme:

# blindly forward these to the accounting chain:
@def $ARANGO_RANGE=4000:9000;
@def &TCP_ACCOUNTING($PORT, $COMMENT, $SRCCHAIN) = {
    @def $FULLCOMMENT=@cat($COMMENT, "_", $SRCCHAIN);
    dport $PORT mod comment comment $FULLCOMMENT NOP;
}
@def &ARANGO_ACCOUNTING($CHAINNAME) = {
# The Coordinators:
    &TCP_ACCOUNTING(8530, "Claus", $CHAINNAME);
# The DB-Servers:
    &TCP_ACCOUNTING(8629, "Pavel", $CHAINNAME);
    &TCP_ACCOUNTING(8630, "Perry", $CHAINNAME);
# The Agency:
    &TCP_ACCOUNTING(4001, "etcd_client", $CHAINNAME);
# it shouldn't talk to itself if it is only running with a single instance:
    &TCP_ACCOUNTING(7007, "etcd_cluster", $CHAINNAME);
}
table filter {
    chain INPUT {
        proto tcp dport $ARANGO_RANGE @subchain "Accounting" {
            &ARANGO_ACCOUNTING("input");
        }
        policy DROP;
        # connection tracking
        mod state state INVALID DROP;
        # allow local packet
        interface lo ACCEPT;
        # respond to ping
        proto icmp ACCEPT; 
        # allow IPsec
        proto udp dport 500 ACCEPT;
        proto (esp ah) ACCEPT;
        # allow SSH connections
        proto tcp dport ssh ACCEPT;
    }
    chain OUTPUT {
        policy ACCEPT;
        proto tcp dport $ARANGO_RANGE @subchain "Accounting" {
            &ARANGO_ACCOUNTING("output");
        }
        # connection tracking
        #mod state state INVALID DROP;
        mod state state (ESTABLISHED RELATED) ACCEPT;
    }
    chain FORWARD {
        policy DROP;
        # connection tracking
        mod state state (ESTABLISHED RELATED) ACCEPT;
    }
}

Note: This is a very basic configuration, mainly with the purpose to demonstrate the accounting feature - so don’t run this in production)

After activating it interactively with

We now use the iptables command line utility directly to review the status our current setting:

iptables -L -nvx
    pkts      bytes target     prot opt in     out     source               destination
    7636  1821798 Accounting  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpts:4000:9000
       0        0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0            state INVALID
   14700 14857709 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            state RELATED,ESTABLISHED
     130     7800 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0
       0        0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0
       0        0 ACCEPT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:500
       0        0 ACCEPT     esp  --  *      *       0.0.0.0/0            0.0.0.0/0
       0        0 ACCEPT     ah   --  *      *       0.0.0.0/0            0.0.0.0/0
       0        0 ACCEPT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:22
Chain FORWARD (policy DROP 0 packets, 0 bytes)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0            state INVALID
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            state RELATED,ESTABLISHED
Chain OUTPUT (policy ACCEPT 296 packets, 19404 bytes)
    pkts      bytes target     prot opt in     out     source               destination
    7720  1882404 Accounting  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpts:4000:9000
   14575 14884356 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            state RELATED,ESTABLISHED
Chain Accounting (2 references)
    pkts      bytes target     prot opt in     out     source               destination
     204    57750            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8530 /* Claus_input */
      20    17890            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8629 /* Pavel_input */
     262    97352            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8630 /* Perry_input */
    2604   336184            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:4001 /* etcd_client_input */
       0        0            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:7007 /* etcd_cluster_input */
     204    57750            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8530 /* Claus_output */
      20    17890            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8629 /* Pavel_output */
     262    97352            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:8630 /* Perry_output */
    2604   336184            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:4001 /* etcd_client_output */
       0        0            tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:7007 /* etcd_cluster_output */

You can see nicely the Accounting sub-chain with our comments. These should be pretty straight forward to match.We also see the pkts and bytes columns. They contain the current value of these counters of your system.

Since your system now generates these numbers, we want to configure collectd with its to aggregate them.

We do so in the /etc/collectd/collectd.conf.d/iptables.conf:

Now we restart collectd with , watch the syslog for errors. If everything is OK, our values should show up in:

/var/lib/collectd/rrd/localhost/iptables-filter-Accounting/ipt_packets-Claus_output.rrd

We can inspect our values with kcollectd:

Network usage

Monitoring ArangoDB Cluster network usage

Solution