概述

    从 Configuration → Hosts （配置→ 主机）访问主机的低级别发现规则列表，随后点击相应主机的Discovery （发现）。

    显示现有的低级别发现规则列表：

    显示数据:

    配置新的低等级发现规则，可以点击顶部右上角的 Create discovery rule 按钮。and corner.

    批量编辑选项

    列表下面的按键会提供一些批量编辑选项：

    • Disable - 将低等级发现规则的状态改为 Disabled 禁用。

    要使用这些选项，请在各个发现规则之前标记复选框，然后单击所需的按钮

    5 Discovery rules

    Overview

    The list of low-level discovery rules for a template can be accessed from Configuration → Templates and then clicking on Discovery for the respective template.

    The list of low-level discovery rules for a host can be accessed from Configuration → Hosts and then clicking on Discovery for the respective host.

    A list of existing low-level discovery rules is displayed.

    Displayed data:

    ColumnDescription
    NameName of the rule, displayed as a blue link.
    Clicking on the rule name opens the low-level discovery rule .
    If the discovery rule belongs to a template, the template name is displayed before the rule name, as a grey link. Clicking on the template link will open the rule list on the template level.
    ItemsA link to the list of item prototypes is displayed.
    The number of existing item prototypes is displayed in grey.
    TriggersA link to the list of trigger prototypes is displayed.
    The number of existing trigger prototypes is displayed in grey.
    GraphsA link to the list of graph prototypes displayed.
    The number of existing graph prototypes is displayed in grey.
    HostsA link to the list of host prototypes displayed.
    The number of existing host prototypes is displayed in grey.
    KeyThe item key used for discovery is displayed.
    IntervalThe frequency of performing discovery is displayed.
    Note that discovery can also be performed immediately by pushing the Check now button below the list.
    TypeThe item type used for discovery is displayed (Zabbix agent, SNMP agent, etc).
    StatusDiscovery rule status is displayed - Enabled, Disabled or Not supported. By clicking on the status you can change it - from Enabled to Disabled (and back); from Not supported to Disabled (and back).
    InfoIf everything is fine, no icon is displayed in this column. If there are errors, a red square icon with a cross is displayed. Move the mouse over the icon and you will see a tooltip with the error description.

    To configure a new low-level discovery rule, click on the Create discovery rule button in the top right-hand corner.

    Mass editing options

    Buttons below the list offer some mass-editing options:

    • Enable - change the low-level discovery rule status to Enabled

    • Disable - change the low-level discovery rule status to Disabled

    • Check now - perform discovery based on the discovery rules immediately. See more details. Note that when performing discovery immediately, the configuration cache is not updated, thus the result will not reflect very recent changes to discovery rule configuration

    To use these options, mark the checkboxes before the respective discovery rules, then click on the required button.