SliderJoint

Category: Core

Piston kind of slider between two bodies in 3D.

enum Param:

PARAM_LINEAR_LIMIT_UPPER = 0 — The maximum difference between the pivot points on their x-axis before damping happens.
PARAM_LINEAR_LIMIT_LOWER = 1 — The minimum difference between the pivot points on their x-axis before damping happens.
PARAM_LINEAR_LIMIT_SOFTNESS = 2 — A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.
PARAM_LINEAR_LIMIT_RESTITUTION = 3 — The amount of restitution once the limits are surpassed. The lower, the more velocityenergy gets lost.
PARAM_LINEAR_LIMIT_DAMPING = 4 — The amount of damping once the slider limits are surpassed.
PARAM_LINEAR_MOTION_SOFTNESS = 5 — A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.
PARAM_LINEAR_MOTION_RESTITUTION = 6 — The amount of restitution inside the slider limits.
PARAM_LINEAR_MOTION_DAMPING = 7 — The amount of damping inside the slider limits.
PARAM_LINEAR_ORTHOGONAL_SOFTNESS = 8 — A factor applied to the movement across axes orthogonal to the slider.
PARAM_LINEAR_ORTHOGONAL_RESTITUTION = 9 — The amount of restitution when movement is across axes orthogonal to the slider.
PARAM_LINEAR_ORTHOGONAL_DAMPING = 10 — The amount of damping when movement is across axes orthogonal to the slider.
PARAM_ANGULAR_LIMIT_LOWER = 12 — The lower limit of rotation in the slider.
PARAM_ANGULAR_LIMIT_SOFTNESS = 13 — A factor applied to the all rotation once the limit is surpassed.
PARAM_ANGULAR_LIMIT_RESTITUTION = 14 — The amount of restitution of the rotation when the limit is surpassed.
PARAM_ANGULAR_LIMIT_DAMPING = 15 — The amount of damping of the rotation when the limit is surpassed.
PARAM_ANGULAR_MOTION_SOFTNESS = 16 — A factor applied to the all rotation in the limits.
PARAM_ANGULAR_MOTION_RESTITUTION = 17 — The amount of restitution of the rotation in the limits.
PARAM_ANGULAR_MOTION_DAMPING = 18 — The amount of damping of the rotation in the limits.
PARAM_ANGULAR_ORTHOGONAL_SOFTNESS = 19 — A factor applied to the all rotation across axes orthogonal to the slider.
PARAM_ANGULAR_ORTHOGONAL_RESTITUTION = 20 — The amount of restitution of the rotation across axes orthogonal to the slider.
PARAM_ANGULAR_ORTHOGONAL_DAMPING = 21 — The amount of damping of the rotation across axes orthogonal to the slider.
PARAM_MAX = 22 — Represents the size of the enum.

Slides across the x-axis of the pivot object.

float angular_limit/damping

Setter	set_param(value)
Getter	get_param()

The amount of damping of the rotation when the limit is surpassed.

A lower damping value allows a rotation initiated by body A to travel to body B slower.

angular_limit/lower_angle

The lower limit of rotation in the slider.

float angular_limit/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation when the limit is surpassed.

Does not affect damping.

angular_limit/softness

Setter	set_param(value)
Getter	get_param()

Makes all rotation slower when between 0 and 1.

float angular_limit/upper_angle

The upper limit of rotation in the slider.

Setter	set_param(value)
Getter	get_param()

The amount of damping of the rotation in the limits.

angular_motion/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation in the limits.

float angular_motion/softness

Setter	set_param(value)
Getter	get_param()

A factor applied to the all rotation in the limits.

angular_ortho/damping

The amount of damping of the rotation across axes orthogonal to the slider.

float angular_ortho/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation across axes orthogonal to the slider.

angular_ortho/softness

Setter	set_param(value)
Getter	get_param()

A factor applied to the all rotation across axes orthogonal to the slider.

float linear_limit/damping

Setter	set_param(value)
Getter	get_param()

The amount of damping that happens once the limit defined by and linear_limit/upper_distance is surpassed.

linear_limit/lower_distance

Setter	set_param(value)
Getter	get_param()

float linear_limit/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution once the limits are surpassed. The lower, the more velocity-energy gets lost.

linear_limit/softness

Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.

float linear_limit/upper_distance

The maximum difference between the pivot points on their x-axis before damping happens.

linear_motion/damping

Setter	set_param(value)
Getter	get_param()

The amount of damping inside the slider limits.

float linear_motion/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution inside the slider limits.

linear_motion/softness

Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.

float linear_ortho/damping

Setter	set_param(value)
Getter	get_param()

The amount of damping when movement is across axes orthogonal to the slider.

linear_ortho/restitution

Setter	set_param(value)
Getter	get_param()

The amount of restitution when movement is across axes orthogonal to the slider.

float linear_ortho/softness

Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across axes orthogonal to the slider.