SliderJoint

Slider between two PhysicsBodies in 3D.

Slides across the X axis of the pivot object. See also .

Properties

Enumerations

enum Param:

• PARAM_LINEAR_LIMIT_UPPER = 0 —- The maximum difference between the pivot points on their X axis before damping happens.
• PARAM_LINEAR_LIMIT_LOWER = 1 —- The minimum difference between the pivot points on their X axis before damping happens.
• PARAM_LINEAR_LIMIT_SOFTNESS = 2 —- A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.
• PARAM_LINEAR_LIMIT_RESTITUTION = 3 —- The amount of restitution once the limits are surpassed. The lower, the more velocityenergy gets lost.
• PARAM_LINEAR_LIMIT_DAMPING = 4 —- The amount of damping once the slider limits are surpassed.
• PARAM_LINEAR_MOTION_SOFTNESS = 5 —- A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.
• PARAM_LINEAR_MOTION_RESTITUTION = 6 —- The amount of restitution inside the slider limits.
• PARAM_LINEAR_MOTION_DAMPING = 7 —- The amount of damping inside the slider limits.
• PARAM_LINEAR_ORTHOGONAL_SOFTNESS = 8 —- A factor applied to the movement across axes orthogonal to the slider.
• PARAM_LINEAR_ORTHOGONAL_RESTITUTION = 9 —- The amount of restitution when movement is across axes orthogonal to the slider.
• PARAM_LINEAR_ORTHOGONAL_DAMPING = 10 —- The amount of damping when movement is across axes orthogonal to the slider.
• PARAM_ANGULAR_LIMIT_LOWER = 12 —- The lower limit of rotation in the slider.
• PARAM_ANGULAR_LIMIT_SOFTNESS = 13 —- A factor applied to the all rotation once the limit is surpassed.
• PARAM_ANGULAR_LIMIT_RESTITUTION = 14 —- The amount of restitution of the rotation when the limit is surpassed.
• PARAM_ANGULAR_LIMIT_DAMPING = 15 —- The amount of damping of the rotation when the limit is surpassed.
• PARAM_ANGULAR_MOTION_SOFTNESS = 16 —- A factor applied to the all rotation in the limits.
• PARAM_ANGULAR_MOTION_RESTITUTION = 17 —- The amount of restitution of the rotation in the limits.
• PARAM_ANGULAR_MOTION_DAMPING = 18 —- The amount of damping of the rotation in the limits.
• PARAM_ANGULAR_ORTHOGONAL_SOFTNESS = 19 —- A factor applied to the all rotation across axes orthogonal to the slider.
• PARAM_ANGULAR_ORTHOGONAL_RESTITUTION = 20 —- The amount of restitution of the rotation across axes orthogonal to the slider.
• PARAM_ANGULAR_ORTHOGONAL_DAMPING = 21 —- The amount of damping of the rotation across axes orthogonal to the slider.
• PARAM_MAX = 22 —- Represents the size of the Param enum.

• angular_limit/damping

The amount of damping of the rotation when the limit is surpassed.

A lower damping value allows a rotation initiated by body A to travel to body B slower.

• float angular_limit/lower_angle

The lower limit of rotation in the slider.

• angular_limit/restitution

The amount of restitution of the rotation when the limit is surpassed.

Does not affect damping.

• float angular_limit/softness

Makes all rotation slower when between 0 and 1.

• angular_limit/upper_angle

The upper limit of rotation in the slider.

• float angular_motion/damping

The amount of damping of the rotation in the limits.

The amount of restitution of the rotation in the limits.

• angular_motion/softness

A factor applied to the all rotation in the limits.

• float angular_ortho/damping

The amount of damping of the rotation across axes orthogonal to the slider.

• angular_ortho/restitution

The amount of restitution of the rotation across axes orthogonal to the slider.

• float angular_ortho/softness

A factor applied to the all rotation across axes orthogonal to the slider.

• linear_limit/damping

• float linear_limit/lower_distance

The minimum difference between the pivot points on their X axis before damping happens.

• linear_limit/restitution

The amount of restitution once the limits are surpassed. The lower, the more velocity-energy gets lost.

• float linear_limit/softness

A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.

• linear_limit/upper_distance

The maximum difference between the pivot points on their X axis before damping happens.

• float linear_motion/damping

The amount of damping inside the slider limits.

• linear_motion/restitution

The amount of restitution inside the slider limits.

• float linear_motion/softness

A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.

• linear_ortho/damping

The amount of damping when movement is across axes orthogonal to the slider.

• float linear_ortho/restitution

• linear_ortho/softness

A factor applied to the movement across axes orthogonal to the slider.

Method Descriptions

• float get_param ( param ) const

• void set_param ( Param param, value )